How to Tell When Your Slab Leak Is Serious

Slab leaks happen frequently in your home’s under-slab foundation, where pipes and drainage systems are installed into the concrete base. These leaks are the worst to homeowners because they can be hidden for some time before you even realize something is amiss. If you see these symptoms, it could mean that your house has a slab leak, according to Plumbers in Lewisville TX:

slab leak locate

– Stains or yellowing around the exterior of your house. When damp or mildew conditions exist, mold can grow quickly and be difficult to remove. If you’ve noticed this problem, it may mean you have a basement leak, which should be checked out by a licensed professional right away. Mold can lead to serious health issues, so be sure to let a professional know right away.

– Cracks in the basement walls. It’s a very common occurrence that walls crack during cold and extreme cold weather. In many cases, this type of cracking is caused by a wet basement, and a plumber can easily identify this kind of damage using a leak detector. A plumber may also check for leaks by checking if water has been seeping into the basement walls from above, which can cause the walls to crack more. If water has seeped up through the basement walls, it can cause water damage on the other levels of the basement.

– Sump Pump or other drainage system clogs. These types of problems can occur when the drainage system becomes clogged during rain, when it becomes blocked from tree roots, when the drain system becomes damaged due to heavy rains, or when tree roots push the drain system into the basement. If your house has these conditions, you need a qualified plumber to diagnose and fix this type of problem.

– Sudden increase in hot water. While it may be tempting to turn on the hot water heater and use the machine to flush the pipes, if you do this, you could risk burning the pipes and causing a serious fire.

– Worn-out, worn-out, or broken pipes. You might also find water dripping in your sink, faucets, or pipes and leaking into the floor. If you suspect that you have cracks in the foundation or in your plumbing system, you can use a leak detector to determine whether or not this is the case.

– Other signs that a leak could be present include unusual odors and leaking noises coming from your pipes. Check for black mold or mildew spots that appear on the surface of your foundation. If your drainage system is clogged, you may also smell strong odors coming from under your house. If there are no odors or spots, it may mean that the drainage system is damaged. If the drainage system isn’t damaged, however, you may just need to replace some of the pipe joints.

In order to properly diagnose and locate a leak, the first thing you need to do is get down to the root of the leak. A plumber can assess the damage and find out what type of damage has been done and what needs to be done to fix it.

Once the damage has been assessed, the next step will be to shut off the water supply in the area so that any further damage won’t occur. Your plumber can also check the pipes and the drainage system. If there are holes, he or she will be able to remove any clogs, fix any leaking pipes, or repair any damage caused by tree roots or debris.

Now you can address the damage and find out where the damage is located. This may involve using a tape measure to determine how much of the slab is affected. It may also involve getting down deep to locate the leak, which requires a level to the top and bottom of the wall. This will allow you to use a trowel or some type of probe to locate the area of the leak.

Sometimes, your plumber can also use a leak detector to pinpoint exactly where the leak is. You may need to call a professional to do this for your leak since this tool isn’t always as sensitive. But, if your plumber has one, you should listen carefully to the sounds produced by the device and listen for a faint clicking noise when something is pressing on the leak. If you hear this clicking sound, then you should be able to tell if the leak is near the damaged areas.

You may also be able to find a damaged or leaking pipe by using a drill or a screwdriver to pry up the wall or ceiling. You can then insert a long screwdriver into the hole and try to pull up on the wall or ceiling to locate the leak.

 

Related Articles:

http://ajpietigconcrete.biz/finding-quality-remodeling-contractors/

http://concreteexpansionjointrepair.com/concrete-contractors-in-cleveland-ohio/

https://concretecontractorarlingtontx.com/choosing-a-floor-for-your-home/